The characteristics of the carriage panel forming machine: it has the characteristics of compounding, uniqueness, high efficiency, stability, etc., especially in terms of improving efficiency, centralized control and product output flatness. It has technical advantages. The carriage panel is used in the cold bending line The top can be formed in one go, and the internal structure of the formed car panel is solid.

Types of truck carriages: The most widely used universal carriage is the ordinary railing carriage, which generally has a bottom plate and four railings (front plate, rear plate and left and right side plates) with a height of 302~500mm. The bottom plate is supported on the truck through cross beams On the longitudinal beams, most carriage floors are also equipped with longitudinal beams to increase the support rigidity. The railings of the carriages are divided into two forms: three-sided opening and one-sided opening. The left and right side panels and rear panels of the three-sided carriage are installed with the help of several hinges. On the floor, bolts and hooks are used to fasten each other; the side-opening carriage is also called a floor-type carriage. The floor is low from the ground. The wheel arches of the car protrude into the floor and are connected to the side panels on both sides. Only the rear panel It can be opened. The front end of the carriage is equipped with a safety rack, which is used to reduce the consequences of rollover accidents and can carry a small amount of over-long cargo.