The double-layer Roll Forming Machine is a single roll forming unit consisting of a set of rollers that can produce tile purlins of various specifications. Its main components include: passive loading rack, punching device, leveling device, hydraulic station, computer control system and post-forming cutting device, etc. And because the flying saw punching device uses an automated device, it is also easy to operate.

The double-layer Roll Forming Machine uses wet production to produce glazed tiles, so when cutting, a vacuum screw extrusion mechanism is often used to accurately shape and suppress the tile blanks. However, this type of Roll Forming Machine also has some bad characteristics, such as the complex suspension structure of the connecting rod, many parts, high cost, and time-consuming assembly, etc. However, when the Roll Forming Machine is working, its requirements are multi-tasking but not independent. The frame has good durability and can always keep the connecting rods from deforming and shifting.

The double-layer Roll Forming Machine is an economical cutting profile with good speed, so it can make the shape of the section more correct, so that the processed steel can exert high efficiency, thereby improving its load-bearing capacity. It is different from the ordinary I-shaped Roll Forming Machineing machine. It widens the wings of the H-shaped steel, so both the inner surface and the outer surface are parallel, which is also convenient for many snails and other manufacturers. The connection of the components makes the size and composition more accurate and diverse, giving workers more choices.

The cross-section shape of the double-layer Roll Forming Machine is correct, and the profiled plate formed by the machine roll is both solemn and elegant, beautiful and novel, and has a smooth appearance, uniform corrugation, and good utilization rate. The transmission sleeves of the upper and lower mold systems are assembled with the rotating sleeves respectively. Driven by the synchronously rotating worm gear transmission device, the transmission sleeve and the rotating sleeve are in a mutually disengaged or meshed state by controlling the dial difference installed on the upper and lower transmission sleeves. It has high strength, high degree of automation, reasonable cost, and durability. . The double-layer Roll Forming Machine uses a thick-walled three-roller mirror calender. It has good rigidity and can adjust the gap between the calender rollers. Check whether the lower shaft is in a straight line. Find a line to straighten it. Colored steel Roll Forming Machine The return speed of the machine and the hydraulic swing shearing machine is slow and the noise is loud. Adjust the left and right sides of the lower shaft to level, determine the thickness tolerance of the plastic core board, and then move from the row to the next row. If there is no uneven work, the materials used Great control and utilization.The four corners of the front and rear rows of the double-layer Roll Forming Machine have the same height from the upper end of the bottom shaft of the main frame, and the safe operation of the machine tool can still be ensured in the event of a connector breakage failure. The equipment of the double-layer Roll Forming Machine should be wiped regularly after a normal period of time, and lubricating oil should be added regularly. Before reinstalling the chain, clean the chain to ensure that there is no oil on the surface. Use a rag to wipe off excess lubricating oil on the chain during the process of adding lubricating oil. Do not exceed the minimum closing height of the Roll Forming Machine.