A brief introduction to the glazed Roll Forming Machine: Whether glazed tiles and single tiles can be combined into a double-layer press. After learning about the double-layer press and color steel equipment, many customers will call to ask whether the equipment for glazed tiles can be combined with single-layer Roll Forming Machinees. Commonly used equipment is combined into double-layer equipment. Today I will share with you some double-layer combination equipment of glazed tiles and veneer equipment. The commonly used 840 glazed tile/900 model double-layer Roll Forming Machineing machine on the market is made of color steel. It is a common three-purpose equipment in the industry. This equipment can produce 840 single boards of roof tiles, 840 model glazed tiles and 900 wall tiles. It reflects the advantages of double-layer color steel equipment, which not only saves space but also saves costs. . In addition, the 820 glazed Roll Forming Machine, the 828 model glazed Roll Forming Machine and other conventional glazed Roll Forming Machine equipment can be combined with single-board equipment to form a double-layer glazed Roll Forming Machine equipment. This form of combination also has prerequisites. For example, two color steel Roll Forming Machineing machines for glazed tiles cannot be combined because the glazed tile equipment itself contains a pressing part and a shearing part. The combination of glazed tile equipment and veneer equipment is mainly due to Only the shearing part of the lower veneer equipment can be combined with the upper equipment, but the profiling parts are all separate, so it is difficult to combine the two glazed tile equipment.