The 840-900 double-layer glazed roll forming machine is composed of an unwinding machine, a forming machine, a PLC computer control system, a hydraulic pump station system, and a fully automatic post-shearing system. It uses high-level automatic control software to realize production information management. The entire unit automation control system adopts a highly integrated network to ensure superior performance of the automation system.

The 840-900 double-layer glazed roll forming machine also has the advantages of easy operation, maintenance, maintenance and mechanical debugging, and easy molding.

roll forming machine equipment will inevitably have problems of one kind or another during the production process. The most common problem is the deviation of the color steel plate. Once deviation occurs, it will affect the production of the machinery, cause the project to lag, and the installation cannot be implemented, so we have to We know how to correct these mistakes. After a long period of research and exploration, we came up with a method to adjust this problem: If the equipment board runs to the right, we need to use an iron block to pad the left corner, or move the right roller For smoothing, level the axis at which axis it is deflected. The upper roller should be consistent with the lower roller. If the upper roller is flattened, the lower roller should also be flattened. Uniform and symmetrical rollers cannot be changed. If it still doesn't work, first adjust the four equal corners of the front and rear rows of the color steel roll forming machine from the main frame to the upper end of the bottom shaft to the same height, then find a line to straighten it, and check whether the bottom shaft is at the same height. On a horizontal line, adjust the left and right sides of the lower axis to be horizontal. 840-900 Double-layer glazed roll forming machine Find the symmetry point, then tighten the lock nuts on both sides, and draw a straight line forward and backward at the center of the middle runner. After adjusting the gap between the upper and lower shafts, it can be smoothly Adjust the machine in a straight line. In fact, the remedy for board deviation requires long-term production and testing. Different deviation directions have different remedies, but one thing to note is that whether it is a mechanical roller or other parts, both sides need to be aligned. Only two sides Only by alignment can we maintain symmetry and the shape of the product will be regular.