63T four-column and three-beam pressequipment

Search
banner

63T four-column and three-beam pressequipment

63T four-column and three-beam pressequipment is a cold stamping die that uses pressure equipment to plastically deform metal sheets.

Product Details

63T four-column and three-beam pressequipment is a cold stamping die that uses pressure equipment to plastically deform metal sheets. It uses the cooperation of the die punch and die to apply tensile force to the flat sheet, causing the sheet to undergo plastic deformation in the die.

Nominal force
Номинальное усилие
630KN
630 кН
Maximum working pressure
Максимальное рабочее давление
25Mpa
25 МПа
effective stroke
Эффективный ход
400mm
400 мм
Max opening
Максимальное открытие
700mm
700 мм
return force
Сила возврата
130KN
130 кН
slider speed
Скорость ползуна
fast 100mm/s
быстро 100 мм/с
Table effective area
Эффективная площадь стола
around (column) 520mm
Front and rear (edge) 520
вокруг (колонна) 520 мм
спереди и сзади (кромка) 520
Top output
Максимальный выход
10T
10 тонн
ejection stroke
Ход выталкивания
200mm
200 мм
oil pump power
мощность масляного насоса
5.5KW
5,5 кВт


Display of product types produced by the equipment

Our company can produce various types of tile pressing machine products, and the roll forming plate types are diverse.

Certifications

Packing

Customer & EXPO


FAQ

Q1:Are you a manufacturer?

A1:Yes absolutely. Welcome a lot for your visiting to us.

Q2:Do you have after-sale support?

A2:Yes, we're always here for giving you advice and support for technical details since we have senior technician. 

Q3:Is there quality control when manufacturing the lines?

from laying off the raw material, processing the rollers and the other parts, make treatment on the roller surface and shaft, assembling, testing and packaging.

Q4:What's your strength comparing to the other supplier?

A4:We'll supplying you the best quality and service. We'll give you good advise beyond your requirements. The lines are easily for installation and with low mantenance requirements.

Q5: Any other service?

A5: We can manufacture, design, installation and debug various roll forming machines including standard and customized machines.
It is free to assemble machine and train your works, but the buyer should pay for the round-trip airplane ticket, and arrange
accommodation during that time.


Copyright © 2023-2024 https://www.hengfumachinery.com All Rights Reserved Dongguang County Hengfu Roll Forming Machinery Co.,Ltd

contact
Contact us contact
Contact Form
  •  Click Replace